What You Need: (click to shop)
Installing the Wet Mop Attachment
1. Remove the dustbin.
2. Open the reservoir tab and fill it with water.
3. Place the left and right mopping cloths onto the mop attachments and secure them on the Velcro side.
4. Insert the mop attachments into UltraVision Pet Combo’s connectors.
5. Replace the dustbin.
Important Notes:
- Use distilled water when operating in hard water areas.
- With the mop attachment connected, UltraVision Pet Combo will lift his mops in NoMop zones.
Mopping Modes
UltraVision Pet Combo has two main cleaning modes.
1. Vacuum and Mop
This is the default mode. Press GO! on UltraVision or in the app. UltraVision will vacuum and mop at the same time, lifting the mops automatically when he reaches carpets and rugs. In this mode, the mopping indicator in the app appears blue.
2. Vacuum Only
Press GO! twice on UltraVision. Or, in the app, tap the mop icon next to the GO !button to turn mopping off, then press GO! In this mode, the mopping indicator appears gray.
You can also adjust vacuum power and mop intensity in the app:
Settings > Cleaning Preferences > slide the Vacuum and Mop sliders to your preferred levels.
After Mopping
1. Remove the dustbin.
2. Open the reservoir tab and empty out any remaining water.
3. Remove the mop attachments, take off the cloths, wash them thoroughly, and let them air dry completely.
⚠️ Important Note: UltraVision Pet Combo’s dustbin is not waterproof. Do not wash or immerse it in water.
FloorSense™ Technology
UltraVision Pet Combo comes with FloorSense technology to detect carpets. He automatically lifts his mop while vacuuming rugs.
With FloorSense off, UltraVision will not detect floor types automatically. If FloorSense is off and there are areas you don’t want mopped, you can create NoMop Zones in the app.
Drawing NoMop Zones
1. Open the app and tap Map.
2. Tap the Edit icon to open the Map Edit Toolbox.
3. Select Add NoMop Zones.
4. Tap the map where you’d like to place a zone — a striped blue rectangle will appear.
5. Resize or move it as needed.
6. Tap the zone to Save or Delete. You can create up to ten zones on a single map.
7. To edit a zone, tap it, adjust it, then tap again and hit Save.
8. To delete, double-tap the zone and select Delete.
9. To exit, tap Back to return to the toolbox.
Browse Support Guides
Still need help? We’re always eager to chat!
.png)
