Mopping

Mopping Attachments

Mopping Cloths

What You Need: (click to shop)

Installing the Wet Mop Attachment

Important Note: Use distilled water when operating in hard water areas.

1. Remove the dustbin.

2. Open the reservoir tab and fill it with water.

3. Place the left and right mopping cloths onto the mop attachments and secure them on the Velcro side.

4. Insert the mop attachments into Dustin Combo’s connectors.

5. Replace the dustbin.

Important Note: With the mop attachment connected, Dustin Combo will not enter the NoMop zones.

Mopping Modes

Dustin Combo has two main cleaning modes.

1. For Vacuum and Mop, which is the default mode, press GO on Dustin Combo or in the app.
Dustin will vacuum and mop at the same time, lifting the mops automatically when he reaches carpets and rugs.

In this mode, the mopping indicator in the app appears blue.

2. For Vacuum Only, press GO twice on Dustin Combo.

Or, in the app, tap the mop icon next to the GO button to turn mopping off, then press GO.
In this mode, the mopping indicator appears gray.

You can also adjust vacuum power and mop intensity in the app:
Settings > Cleaning Preferences > slide the Vacuum and Mop sliders to your preferred levels.

After Mopping

1. Remove the dustbin.

2. Open the reservoir tab and empty out any remaining water.

3. Remove the mop attachments, take off the cloths, wash them thoroughly, and let them air dry completely.

⚠️ Remember: Dustin Combo’s dustbin is not waterproof. Do not wash or immerse it in water.

FloorSense Technology

1. Dustin Combo comes with FloorSense technology to detect carpets. He automatically lifts his mop while vacuuming rugs.

2. With FloorSense off, Dustin will not detect floor types automatically. If FloorSense is off and there are areas you don’t want mopped, you can create NoMop Zones in the app.

How to draw NoMop Zones:

1. Open the app and tap Map.

2. Tap the Edit icon to open the Map Edit Toolbox.

3. Select Add NoMop Zones.

4. Tap the map where you’d like to place a zone — a striped blue rectangle will appear.

5. Resize or move it as needed.

6. Tap the zone to Save or Delete.

You can create up to ten zones on a single map.

To edit a zone, tap it, adjust it, then tap again and hit Save.

To delete, double-tap the zone and select Delete.

To exit, tap Back to return to the toolbox.