What You Need: (click to shop)
Remote Control Buttons
The remote control is your most useful tool when communicating with bObi. It allows you to set bObi’s cleaning schedule and activate her cleaning modes. Each time you select an action on the remote, bObi will chirp once before performing the selected action.
CUR TIME - Sets the current time and weekday
SCH TIME - Sets bObi's cleaning schedule
ALL/NONE - Selects/deselects all weekdays
UV - Turns bObi’s UV light ON and OFF
HI/BYE - Puts bObi in and out of standby mode
OK - Confirms selection
Navigational Arrows - Guide bObi forward, backward, left, and right
STOP - Pauses or resumes bObi’s movement
SPEED - Alternates between bObi’s two speeds
JUICE - Sends bObi to her charging station
WAFFLE - bObi will clean a localized mess
GO! - bObi will clean on her default cleaning mode
Syncing bOb's Remote
bObi’s remote control requires two AAA batteries (not included). Do not leave the batteries in the remote if you are not using it on a regular basis. Keep the remote at room temperature. If bObi is not responding to her remote, it likely needs to be synced.
To sync bObi's remote:
1. Flip bObi’s power switch OFF.
2. While holding down the OK button on bObi’s remote, flip bObi’s power switch ON.
3. bObi will chirp twice to let you know the sync was successful.
If bObi does not chirp, repeat the process.
Using the Navigational Arrows
Hold down the remote’s navigational buttons to keep bObi moving in the desired direction. Release the button when you are done manually driving bObi.
bObi’s edge sensors are located along her front, not along her back. Do not reverse bObi towards edges, as she will fall.
7. Let Bob Sweep!