Support / Bob Standard / Battery Installation

Battery Installation

Need to Replace a Part? (click to shop)

Bob-Pro-Side-Brush.jpg

Battery

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Replacing Bob's Battery

To replace Bob’s battery:

1. Remove the battery cover on Bob’s underside using a Phillips head screwdriver.

2. Lift the battery out of it’s compartment, and unplug the connecting wires.

3. Plug in the new battery and slide it into the empty compartment.

4. Re-tighten the screws on the battery cover.

side-brush-1-pethair.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

Storing Bob

Do not let Bob sit with his power switch ON for more than 5 days; switch him OFF to conserve his battery, and remove him from the station.

If you are not using Bob for an extended period of time, unplug his charging station, remove his battery, and store everything in a dry place at room temperature.

Browse Support Guides

Browse Repair Guides