Support / Bob Pro / Washing the Dustbin

Washing the Dustbin

Need to Replace a Part? (click to shop)

Bob-Pro-Side-Brush.jpg

Filter

Bob-Pro-Side-Brush.jpg

Cleaning Tool

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Emptying Bob's Dustbin

To maximize Bob’s efficiency, it is best to empty his dustbin about once a week, or about once every 6 cleaning cycles.

​1. Push down the tab on Bob’s back and slide the dustbin out.

2. Lift the tab to open the dustbin.​

3. Dump the contents of the dustbin and brush it with Bob’s cleaning tool.

4. Close the dustbin and slide it back into Bob.

Quick Tips:​
- Do not wash the dustbin without removing the filters first.
- Do not force the dustbin past its natural opening point.

side-brush-1-pethair.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

Washing Bob's Dustbin

Bob’s dustbin can be washed once you remove his filters.

​1. Push down the tab on Bob’s back and slide the dustbin out.

2. Lift the tab to open the dustbin. Lift the filter tray out, using the tabs for leverage.

3. Remove the filters and set them aside. Wash the dustbin with water.

4. Allow the dustbin to fully dry before replacing the filters and filter tray. Close the dustbin and slide it back into Bob.

Quick Tips:
- Do not force the dustbin past its natural opening point.
- When replacing the filters, make sure the tab on the high-efficiency filter faces up.

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

Browse Support Guides

Browse Repair Guides