Support / Bob PetHair Vision Plus / Wet Mop Attachment

Wet Mop Attachment

What You Need: (click to shop)

Bob-Pro-Side-Brush.jpg

Mopping Cloths

Bob-Pro-Side-Brush.jpg

Accessories Bundle

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Bob-Pro-Side-Brush.jpg

Mopping Attachment

Installing the Wet Mop Attachment

Important Note: Use distilled water when operating in hard water areas.

1. Place the mopping cloth on the mop attachment.

2. Open the tab and fill the reservoir with water.

3. Remove the dustbin and insert the mop attachment.

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

Wet Mop Attachment Maintenance

Important Note: The reservoir should be drained after use to avoid possible water damage.

1. Remove the mop attachment.

2. Pull open the tab and empty the reservoir.

3. Tap out any debris that may have collected inside the attachment.

4. Wash the mopping cloth. Air-dry all parts when done.

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png
05-01-dustbin-slidingout.png

Browse Support Guides