top of page
Support / Bob PetHair SLAM / Wet Mop Attachment
Wet Mop Attachment
What You Need: (click to shop)
Mopping Cloths
Mopping Attachment
Installing the Wet Mop Attachment
Important Note: Use distilled water when operating in hard water areas.
1. Place the mopping cloth on the mop attachment.
2. Open the tab and fill the reservoir with water.
3. Remove the dustbin and insert the mop attachment.


Wet Mop Attachment Maintenance
Important Note: The reservoir should be drained after use to avoid possible water damage.
1. Remove the mop attachment.
2. Pull open the tab and empty the reservoir.
3. Tap out any debris that may have collected inside the attachment.
4. Wash the mopping cloth. Air-dry all parts when done.

